Freeware for Windows XP
CPU Usage in Tray
Display CPU usage in the Windows system tray area.
==================
Terms of Agreement:
==================
By using the included Freeware, you agree to the following terms...
1) You may use this software freely and with no charge.
2) You MAY NOT redistribute this software (for example to a web site)
without written permission from the author. Failure to do so is a
violation of copyright laws.
3) You will abide by any additional copyright restrictions which the
author may have included in this software package.
==========
Disclaimer:
==========
Users of this software must accept this disclaimer of warranty:
The software is supplied as is. The author disclaims all warranties,
expressed or implied, including, without limitation, the warranties of
merchantability and of fitness for any purpose. The author assumes no
liability for damages, direct or consequential, which may result from the
use of said software.
* New
CUIT X4
v1.07 (File Size:
28 KB Date:
October
29th, 2009)
* Displays each core CPU usage in a tray icon as a number or a graph.
* Displays CPU usage and average usage per core in interface.
* Supports up to four CPU cores.
(shown below - 2 core CPU, one core as graph and one as a number)
CUIT X3
v1.0 (File Size: 10 KB Date: March
13th, 2009)
* Requires one Tri-Core CPU (i.e. AMD X3).
* Displays the CPU usage in a single tray icon as three bar graphs, one bar for
each core.
CUIT
v1.0.1
(File Size: 10 KB
Date: March 8th, 2009)
* Requires Dual, Quad or more CPUs. [Odd
number of CPUs (1, 3, 5, etc) is not supported!]
* Displays the CPU usage in tray as two bar graphs.
Note:: On a
Quad Core (or more) an average is taken.
For example if you have 8 cores the left side of the tray icon would display the
average CPU usage from cores 0,1,2 and 3, the right side would average cores
4,5,6 and 7.
Multi-Core Version 1.01
(File Size:
10 KB
Date:
July 17th, 2008)
* Displays the total CPU usage in tray as a single bar graph.
* One CPU socket only? - See User Feedback
(Multi-Core Version 1.01) below.
* These two display the total CPU usage from all cores as a number.
As
Small Number v1.0
(File Size:
10 KB
Date:
April 8th, 2009)
As
Larger Number v1.0
(File Size:
11 KB
Date:
April 8th, 2009)
These older versions also show the average CPU usage.
v1.48
(File Size:
15 KB
Date:
December 15th, 2007)
* Requires/Supports one Dual Core CPU only!
* Displays the CPU usage in tray as two bar graphs.
v1.45
(File Size:13 KB
Date:
October 29th, 2007)
* Supports Single and Dual Core CPUs only!
* Displays the CPU usage in tray as one or two bar graphs.
User Feedback...
|
CUIT X4 v1.07, this
program lists the cpu graphs/numbers in the order 3-0-1-2 in Windows 7
notification area. Going to "Customize Notification icons" from the
taskbar, shows only CPU3 when program is closed. If this was CPU0,
perhaps the order would be correct? You can rearrange the order of the
icons using drag and drop but it is not remembered at the next program
startup. Well the programs are actually made for WinXP, sorry but currently have no plans to update the apps at this time. Thanks for the feedback!
The Multi-Core Version 1.01
does not work with my two single core CPUs, but the older v1.48 version
works. Update: I've recently added other versions using similar code as used in the older v1.45/v1.48 called CUIT. Thanks for the feedback! I love CPU Usage in Tray. Great!!!! Could you make one
so 4 cores each have a graph in the tray? I've tried and it's really hard to see four clearly, theres just not enough room in one tray icon to make it look decent IMO. The only other way would be to have multiple tray icons. How do these apps
work with Intel HyperThreading enabled, are they counted as cores? The HT (fake) cores should be counted as a real core, but as far as how its usage will be detected and accounted for I'm not sure, we only use AMD so have no way to test that, sorry! |